マイクロ加工研究会 TOP
トピックス Topics 概要 Outline 懇親会・シンポジウム Symposium テーマ Theme 国際交流 Internatioal exchange 技術資料集 Materials リンク集 Links お問い合わせ Inquiry

The 3rd Workshop on MilliStructure Manufacturing Technology

12-13 Aug, 2002
Bo-Kwang Pheonix-Park Hotel
Pheonix-Park Center, Won-Ju city, Kangwon-Do, KOREA

Organized by
KITECH (Korea Institute of Industrial Technology)
Supported by
Ministry of Commerce,Industry and Energy




12nd Aug., 2002
13:00- Registration
13:30- Opening address (Dr.NamSun Cho, KITECH)
13:40- Congratulatory address (Mr. InSuk Nam, Ministry of Commerce,Industry and Energy)
Session 1: Micro Sheet-Metal Forming (Chairman: Prof.S.I.Oh)
14:00-14:15 Enhancement of Precision and Accuracy of Micro Hole Punching System
B.Y.Joo*, J.H.Yoo*, S.H.Rhim**, and S.I.Oh**
 
*Graduate School, Seoul National University
**Seoul National University
14:15-14:30 Design of a High Precision Press with Hydrostatic Bearings
Kwon-hee Kim*, Sang-youl Jeon*, Ju-hee Hahm**,
Doo-hyun Cho**, Chang-hee Cho**, Soo-ik Oh***
  *Korea Univ., **Korea Univ., Graduate School, ***Seoul Natl. Univ.
14:30-14:45 The Development of Precision Punching System and Burr Minimization Technology
H.Y.Kim*, B.H.Kim*, I.B.Chang*, Y.S.Shin**, S.I.Oh***
 
*Kangwon National University, Division of Mechanical and Mechatronics Engineering
**Kangwon National University, Division of Mechanical and Mechatronics Engineering, Graduate school
***Seoul National University, School of Mechanical and Aerospace Engineering
14:45-15:00 Formability Study and Experiments of Thin Foils by Grain Boundary Finite Element Method
S.K.Lee, T.W.Ku, B.S.Kang
  Dept. of Aerospace Engineering, Pusan Nationa; University
15:00-15:20 Coffee Break
Session 2: Invited lectures (Chairman: Dr. K.H.Na)
15:20-15:40 Advances in Nano Precision Machining Techniques and Research Activities
H.Ohmori, RIKEN
15:40-16:00 Study on ELID Ground Micro-tool and its Applications
K.Katahira, RIKEN
Session 3: Micro Volume Transfer (Chairmen: Dr.H.J.Park)
16:00-16:15 Development of Multifilament Wire Extrusion Technology
K.H.Na, H.J, Park, S.S.Kim, D.J.Yoon, E.Z.Kim, W.Y.Han, Y.S.Jung
  Korea Institute of Industrial Technology
16:15-16:30 Design and Analysis of a Precision Pick & Place System for the Milli-parts using Parallel Robot and Milli-gripper
C.S.Han*, H.S.Choi*, H.C.Yang*, K.H.Na**, S.S.Kim**, T.H.Choi**, H.J.Park**
 
*Hanyang Univ.
**KITECH
16:30-16:45 Analysis of Mechanical Behavior of Ultra-fine Au Wires by Micro-tensile Test Technique
S.H.Hong, K.S.Kim, Y.M.Kim, H.J.Park*, and K.H.Na*
 
Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology
*Industrial Equipment Technology R&D Center, Korea Institute of Industrial Technology
16:45-17:00 A Model for Milli-forming Processes of Crystalline Materials with Damage
Y.S.Lee*, Y.I.Kim**, K.S.Sim**, T.M.Lee**, T.H.Kim**
 
*School of Mechanical & Automotive Engineering, Kookmin University
**Graduate School of Mechanocs and Design, Kookmin University
17:00-17:15 Development of the Millistructure Polymer Patten for Micro Thermofluidic Devices
Chanil Chung*, Jun Keun Chang*,**
 
*Digital Bio Technology Co., Seoul, Korea
**School of Electrical Eng. & Computer Science, Seoul Nat'l Univ., Seoul, Korea
17:30- Banquet
13rd Aug., 2002
Session 4: Micro Injection Molding (Chairman: Dr.S.S.Park)
09:30-09:45 Injection Molding of Micro Structures with High Aspect Ratio
S.S.Park*, S.W.Jung*, J.W.Cho*, T.J.Je**
 
*Korea Electronics Technology Institute
**Korea Institute of Machinery and Materials
09:45-10:00 Development of Micro Injection Molding Machine for Fabrication of Micro Parts
T.J.Je*, B.S.Shin*, D.S.Choi*, E.S.Lee*, S.S.Park**
 
*Korea Institute of Machinery & Materials (KIMM)
**KETI
10:00-10:15 Development of Numerical Simulation System and Mold Design Technology for Microinjection Molding
T.H.Kwon, D.W.Cho, S.S.Lee
  Department of Mechanical Engineering, POSTECH
Session 5: Micro Die and Mold Machining (Chairman: Dr.E.S.Lee)
10:15-10:30 Development of Micro Cutting Technology for Milli-Micro Mold Parts
E.S.Lee, T.J.Je, D.S.Choi, Y.J.Shin, J.K.Lee, H.Y.Lee
  Korea Institute of Machinery & Materials (KIMM)
10:30-10:45 A Study on Micro-hole Ultrasonic Machining using Ultrasonic Vibration
Hon-Zong Choi, Seok-Woo Lee, Bong-Goo Yi
  Korea Institute of Industrial Technology
10:45-11:00 Electromechanic Principle of Electrorheological Poilishing and Evaluation of Polishing Capability
W.B.Kim*, S.H.Lee*, S.J.Lee*, C.W.Park**
 
*Yonsei University
**Korea Polytechnic University
11:00-11:15 Characteristics of RC Circuit with Transistor in Micro-EDM
Phil-Joo Cho, Young-Soo Lee, Chong-Nam Chu
  School of Mechanical and Aerospace Engineering, Seoul National University
11:15-11:30 The Analysis of the Chemically Reacted Layer and Application in Chemical Mechanical Micro Machining (C3M) Process
Haedo Jeong*, Junmin Park**, Hyunwoo Lee**
 
*School of Mechanical Engineering, Pusan National University
**Department of Mechanical and Precision Engineering, Pusan National University
11:30 Closing


copyright